Keeping battery chargers organized is one of those shop upgrades that seems small but instantly makes everything run smoother. When your chargers are scattered across the bench, cords drape everywhere, and batteries get mixed up, it slows you down and turns little jobs into annoyances. A dedicated, well-thought-out charging station fixes all of that. In this guide, we’ll look at a few simple ways to mount and manage your chargers—whether that means screwing them straight into pegboard with drywall screws or attaching them to a sheet of plywood that’s secured to the studs. With a little planning, you can turn a messy corner of your garage into a clean, efficient place to keep every battery topped up and ready to go.
This article contains Amazon Associate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.
Take Inventory and Choose a Charging Zone
Before you start mounting anything, it helps to take stock of what you actually have. Gather all your cordless tool chargers—different brands, voltages, rapid chargers, compact chargers, everything—and lay them out so you can see the sizes, cord lengths, and mounting options. This gives you a clear idea of how much space you’ll need and whether they can all live in the same spot. We have both Dewalt and Milwaukee 12-volt chargers in the shop, personally.
Next, pick a permanent charging zone. Ideally, this should be close to an outlet, near your main workbench, and somewhere with a little airflow so heat from charging batteries can dissipate. Avoid spots that get wet, dusty, or overloaded with extension cords. If you run multiple chargers at once, think about the electrical load on that circuit—sometimes it’s better to dedicate a specific outlet or use a surge-protected power strip mounted right next to your chargers. Choosing the right spot from the start makes the rest of the setup much easier and helps keep your shop layout organized long-term.
Mounting Chargers on Pegboard
Pegboard (either traditional particle board or a more heavy-duty metal counterpart) is one of the easiest ways to get your chargers off the workbench and into a clean, visible layout. This is what we use in our shop. Most cordless tool chargers have built-in keyhole slots on the back, and you can mount them directly to the pegboard supports using simple screws (we’ve found the GRK cabinet screws to work really well in this capacity). Just line up the slots, drive the screws through the pegboard into the wall behind it, and hang the charger in place. This keeps things secure without needing any special brackets or hardware. Of course, you can also use your standard pegboard hooks to hang the chargers themselves.
Pegboard also makes it easy to keep cords under control. You can guide excess length through nearby holes, stash loops on hooks, or bundle everything with Velcro straps so the whole setup stays tidy. Lightweight chargers do well on pegboard, especially if you arrange them vertically to save space or horizontally if you want quicker access. Just keep in mind that really heavy or oversized rapid chargers may flex the pegboard over time (although this has never happened to us personally), so reserve this method for chargers that are moderate in size and weight.
Mounting Chargers on Plywood Secured to Wall Studs
If you’ve got heavier chargers, multiple brands, or just want a more permanent and rock-solid setup, mounting everything to a sheet of plywood is the way to go. Start by cutting a piece of plywood (OSB or similar materials can also work if you have some laying around) large enough to hold all your chargers with room to grow, then screw it directly into the wall studs. This gives you a strong, flat surface that can handle any charger you throw at it without flexing or tearing out.
Once the plywood is in place, you can mount your chargers using their built-in keyhole slots and standard screws. The beauty of this method is that you can rearrange things any time you add new tools or upgrade chargers—just move the screws and shift the layout. You can also mount a durable power strip to the plywood so all the cords stay in one tidy area, and add hooks, shelves, or a small tray underneath for storing spare batteries. It’s a simple upgrade that creates a dedicated, reliable charging station that stays organized even as your tool collection grows.
Outlet and Power Management
A clean charging setup is only as good as the power feeding it, so it’s worth spending a little time managing how everything plugs in. The simplest option is to mount a good-quality surge-protected power strip right on your pegboard or plywood board. This keeps all your charger plugs in one place and makes it easy to turn everything on or off with a single switch. It also prevents cords from dangling all over your workbench or getting tangled behind the wall.
If you run several chargers at once—especially rapid chargers that draw more power—pay attention to the circuit they’re on. We use a label maker and label each outlet with the corresponding breaker in case something unseemly happens.
Garage outlets are often shared with other tools, lights, or appliances, and it’s easy to overload a breaker without realizing it. When in doubt, spread the load or dedicate one outlet just for charging. Cord routing is another small detail that makes a big difference: use zip ties, adhesive cable clips, or small plastic channels to keep everything neat and out of the way. A tidy power setup not only looks better, it keeps your chargers running safely and reliably.
Battery Rotation and Storage
Once your chargers are mounted and powered, the next step is keeping your batteries themselves organized. A simple system can save you from guessing which ones are charged, which need attention, and which are on their last legs. Start by giving each battery a home—whether that’s a small shelf under your chargers, a row of hooks, or a dedicated bin. Some people like to label batteries with numbers or color-coded stickers so they can rotate them evenly and avoid wearing out the same one over and over. Us personally? The batteries are either on a tool, or on a charger.
It also helps to separate charged batteries from dead ones. A small tray or drawer labeled “charged” and another for “needs charging” keeps things idiot-proof when you’re bouncing between projects. If you store a lot of batteries, consider a metal drawer, ammo can (with the lid cracked for ventilation), or a fire-resistant bag for an extra layer of safety. Lithium batteries don’t love extreme heat or cold, so choose a spot that stays fairly stable throughout the year. With a little structure, you’ll spend less time hunting for a good battery and more time getting work done.
Pro tip? Use a paint pen and give each battery a unique number; this will help you keep track of any difficulties or misbehaving batteries over time.
Mobile and Modular Options
If you want the flexibility to move your charging setup around—or just don’t have a permanent wall spot—there are a few mobile options that work surprisingly well. A simple rolling tool cart can turn into a portable charging station by mounting chargers on the side or back panel and securing a power strip right to the frame. This keeps everything together and lets you wheel the whole setup anywhere in the garage or driveway. Another approach is to mount your chargers on a removable board that hooks onto a French cleat system (we use the Craftsman Versatrack system and while it’s a little pricey, we’ve been very happy with it). This makes the entire charger panel easy to lift off and take to a jobsite, then hang back on the wall when you’re done.
Modular systems are great if your tool collection changes frequently or if you mix brands. You can build multiple small boards—one for each tool brand or charger type—and swap them in and out depending on what you’re working on. These setups also make troubleshooting and upgrading easier; instead of redoing your whole charging wall every time you add a new tool, you just adjust one panel. Whether you’re a DIYer or someone who moves around a lot while working, a mobile or modular charging station can keep things organized without locking you into a single layout.
Conclusion
Getting your battery chargers organized doesn’t have to be complicated—just a little planning and a dedicated spot can transform the way your shop functions. Whether you mount them on pegboard with a couple of drywall screws or build a sturdier setup on plywood fastened to the studs, the goal is the same: keep everything visible, accessible, and powered without turning your workbench into a mess of cords and chargers. Add in some thoughtful battery storage, tidy up the cables, and think about safety and power management, and you’ll end up with a charging station that actually makes your day-to-day projects easier. Once everything has a home, you’ll spend less time hunting for batteries and more time getting things done.
