I picked up a new 20-gallon parts washer recently. Well, not new, but new to me. Before I started modifying the parts washer in all the ways that we recommend, I wanted to find out the answer to one commonly asked question — are petroleum-based solvents compatible with Harbor Freight parts washers off the shelf? Will this solvent damage the pump as everyone says, and if so, how does it run? Let’s find out.
This article may contain affiliate links; we earn from qualifying purchases at no additional cost to you.
Petroleum-Based Solvents
I added five gallons of Crown PSC-1000 from Tractor Supply to the reservoir of my parts washer. Almost every 20-gallon parts washer you’ll find is manufactured with pumps that are only compatible with water-based solvents (Purple Power, Pine Sol, Totally Awesome, etc). These are good cleaners, but can damage aluminum parts found in motorcycles and cars.
I prefer petroleum-based solvent, and the least expensive and easiest to find is Crown PSC-1000. Interestingly, my old Harbor Freight washer lists diesel as a compatible solvent, and specifically says to avoid mineral spirits (which work excellently in pumps that are compatible with them). Our article specifically on parts washer solvents goes into more detail about the best solvent for your use case.
I added my parts and turned the washer on.
Results
I’ve set a timer when running the machine. So far, I’m over three hours of runtime on the factory pump, and things are still going strong. Output is good, no weird noises, fires, etc. It’s helped me clean some engine components, including an old Chevy head and transmission parts. PSC-1000 is a good solvent and does a good job.
Of course, this is an older parts washer, which may be more compatible with petroleum-based solvents than plastic pumps in the new units. Still, I hope this test provides a useful data point, in case you can’t afford one of the expensive solvent-rated pumps from Little Giant or Beckett. If the pump goes out, I’ll update this article accordingly. For now, I’ll continue to enjoy my old parts washer running PSC-1000.